substitution request - Alliance Construction Solutions

C. Certification of Pump Performance: Provide pumps whose performance, under specified
operating conditions, is certified by manufacturer.
1.03 SUBMITTALS:
A. Product Data: Submit manufacturer's pump specifications, installation and start-up
instructions, and current accurate pump characteristic performance curves, including pump
curve and system curves, with selection points clearly indicated.
B. Shop Drawings: Submit manufacturer's assembly-type shop drawings indicating
dimensions, weight loadings, required clearances, and methods of assembly of
components.
C. Wiring Diagrams: Submit manufacturer's electrical requirements for power supply wiring
to plumbing pumps. Submit manufacturer's ladder-type wiring diagrams for interlock and
control wiring. Diagrams shall clearly differentiate between portions of wiring that are
factory-installed and portions to be field-installed.
D. Maintenance Data: Submit maintenance data and parts lists for each type of pump,
control, and accessory, including "trouble-shooting" maintenance guide. Include this data,
product data, shop drawings, and wiring diagrams in the Operating and Maintenance
Manual, in accordance with the requirements of Division 15.
E. Submit sequence of operation (domestic water booster system).
F. Submittals must be specific to this project. Generic submittals will not be accepted.
1.04 PRODUCT DELIVERY, STORAGE, AND HANDLING
A. Handle plumbing pumps and components carefully to prevent damage, breaking, denting
and scoring. Do not install damaged plumbing pumps or components; replace with new.
B. Store plumbing pumps and components in a clean, dry location. Protect from weather,
dirt, fumes, water, construction debris, and physical damage.
C. Comply with Manufacturer's rigging and installation instructions for unloading plumbing
pumps and moving them to final location.
1.05 DESIGN CRITERIA
A. The drawings indicate sizes, profiles, connections, and dimensional requirements of
plumbing pumps and are based on specific manufacturer types and models indicated.
Pumps having equal performance characteristics by other manufacturers may be submitted
on, provided that any deviations in dimensions and profiles and efficiencies do not change
the design concept or intended performance, as judged by the Architect/Engineer.
PART 2 – PRODUCTS
2.01 GENERAL
Project No.: 10145
550 15 th Street Dual Brand Hotel
03/16/2012
221123 - 2 PLUMBING PUMPS