substitution request - Alliance Construction Solutions

I. The final carpet pattern, layout, edge binding locations shall be as directed and
approved by Owner's Representative. All associated installation shall be by this
Contractor.
3.4 SEALING CUT EDGES
3.5 SEAMING
A. To prevent fraying and raveling at all seams and transition areas, a continuous
bead of seam adhesive must be applied to the first edge where the face yarn enters
the backing.
B. On woven carpet, all cut edges at seams and transition areas must be secured
with a latex seam adhesive immediately following the seam trimming.
A. Install pad and carpet seams in accordance with manufacturer's published instructions.
B. Locate pad seams at right angles to carpet seams. Where not possible to locate
at right angles, locate pad seam minimum 6 inches away from carpet seams.
Butt pad edges tightly together to form seams without gaps. Tape pad seams.
C. Maintain uniformity of carpet direction and lay of pile. At doors, center seams
under doors; do not place seams in traffic direction at doorways.
D. Orcon Super 3S Wide tape will be used on all public area seams specifying hot
melt tape.
E. The seaming iron with heat shield must be of proper size, matching the hot melt
tape being used.
F. The proper head setting and exposure time must be used to assure proper transfer
without creating damage to backing or pile yarn.
G. Orcon Super 3S tape will be used in Guest Rooms and suites where seams are
specified.
H. Handsewing:
1. An overhand stitch placed no more than 1/2 inch apart and no less than
1/2 inch from the edge of the carpet is required.
2. A latex coating must be applied over the stitching.
3. The seam shall be allowed to dry at least eight (8) hours before stretching.
I. Where conflicts between Owner’s requirements and manufacturer’s requirements
occur, use Owner’s requirements.
3.6 ACCESSORIES
A. Provide carpet edge guard where edge of carpet is exposed; anchor guards to
substrate. Edge guard shall be used in all doorways or openings where no sill is
installed or as required.
Project No.: 10145 SHEET CARPETING
550 15th Street Dual Brand Hotel 096816 - 5
19 March 2012