substitution request - Alliance Construction Solutions

C. The location of existing equipment, piping, ductwork, etc., shown on the drawings has
been taken from existing drawings and is, therefore, only as accurate as that information.
All existing conditions shall be verified from field measurements with necessary adjustment
being made to the drawing information.
D. If asbestos material, in any form, is discovered by this contractor in the process of his work,
he shall report such occurrence to the Architect or Engineer immediately. The Architect or
Engineer will determine the action to be taken for the asbestos removal, which is not a part
of the work to be done under this Division.
1.32 WARRANTIES:
A. Refer to the Division 1 for procedures and submittal requirements for warranties.
B. Compile and assemble the warranties specified in Division 15 into the Operating and
Maintenance Manual.
C. Provide complete warranty information for each item, which shall include name of product
or equipment; date of beginning of warranty or bond; duration of warranty or bond; and
names, addresses, and telephone numbers of manufacturing/servicing personnel as well
as procedures for filing a claim and obtaining warranty services.
D. The Contractor shall warrant all materials, workmanship and the successful operation of
all equipment and apparatus installed for a period of one (1) year from the date of final
acceptance of the entire work as identified in the General Conditions, and shall guarantee
to repair or replace at his own expense any part of the apparatus that may show defect
during that time, provided such defect is, in the opinion of the Architect/Engineer, due to
imperfect material or workmanship and not due to carelessness or improper use on the
part of the owner/operator.
E. Include repair of damage to any part of the premises caused by water and gas leaks or
breaks in piping, fixtures or equipment furnished and installed under this Division which
occur within the warranty period.
F. Include repair of damage to or replacement of any part of the equipment and replacement
of refrigerant and oil caused by leaks or breaks in piping and equipment within the
warranty period.
1.33 OWNER ACCEPTANCE:
A. At the time of acceptance of the building by the Owner, all Division 23 systems shall be in
first-class operating condition in all respects and satisfactory to the Architect/Engineer.
1.34 CLEANING OF EQUIPMENT, MATERIALS AND PREMISES:
A. Clean equipment and materials thoroughly. Leave surfaces to be painted smooth and
clean, ready for painters. Clean entire premises of unused materials, rubbish, debris,
grease spots and dirt left by each Subcontractor. Remove, clean and replace pipeline
strainers after systems have been in operation for a period of thirty (30) calendar days.
B. Provide detergents, solvents and other cleaning agents that are compatible with materials
used in fabrication of systems. They shall not adversely affect materials or mechanisms in
Project No.: 10145
550 15 th Street Dual Brand Hotel
03/16/2012
23 0010 - 15 BASIC MECHANICAL REQUIREMENTS