substitution request - Alliance Construction Solutions

PART 2 – PRODUCTS
2.01 ACCEPTABLE MANUFACTURERS:
A. Manufacturers: Subject to compliance with requirements, provide products by one of the
following:
1. Interceptors:
Project No.: 10145
550 15 th Street Dual Brand Hotel
03/16/2012
a. Copeland Precast
b. Rockford
c. Jay R. Smith
d. Wade
e. Zurn
2.02 OIL AND SAND INTERCEPTORS:
A. General: Provide oil and sand interceptors of type, size and capacity as indicated on the
drawings.
B. Construction: Cast iron, coated with acid resisting rubber on outside and inside. Provide
flow control fitting.
C. Variations: Provide the following variations as required:
1. Steel extension.
2. Anchor flange.
3. Flashing flange and flashing device.
2.03 SOLIDS INTERCEPTORS:
A. General: Provide solids interceptors of type, size and capacity as indicated on the
drawings.
B. Construction: Cast-iron body, aluminum cover, aluminum sediment basket, and
removable bronze screws.
2.04 COMMERCIAL CLOTHES WASHER LINT TRAP:
A. General: Provide lint trap of type, size and capacity as indicated on the drawings.
B. Construction: Aluminum plate construction.
PART 3 – EXECUTION
3.01 EXAMINATION:
22 1323 - 2 SANITARY WASTE INTERCEPTORS