substitution request - Alliance Construction Solutions

PART 1 – GENERAL
1.01 DESCRIPTION OF WORK:
Project No.: 10145
550 15 th Street Dual Brand Hotel
03/16/2012
SECTION 23 1113
FACILITY FUEL-OIL PIPING
A. This Section includes fuel oil piping system and equipment, including:
1. Piping, fittings and specialties.
2. Oil transfer equipment.
3. Oil storage tanks and accessories.
B. Related Sections; The following sections contain requirements that relate to this section:
1.02 DEFINITIONS:
1. Division 2 Section "Earthwork" for excavation, trenching and backfilling for
underground piping.
2. Division 3 Section "Concrete Work" for cast-in-place concrete, reinforcing and
formwork for equipment pads.
3. Division 23 Section "Meters and Gauges" for oil supply and return line
thermometers, and pressure and vacuum gauges.
4. Division 25 Section "Mechanical Identification" for labeling and identification of
fuel oil piping and transfer equipment.
5. Division 25 Section "Mechanical Insulation" for pipe insulation for underground oil
piping.
A. Pipe sizes used in this Specification are Nominal Pipe Size (NPS).
1.03 SUBMITTALS:
A. Product data for the following products.
1. All valves including special duty valves.
2. Fuel oil piping.
3. Oil submersible and transfer pumps. Include performance curves, electrical
characteristics and specified accessories.
4. Oil piping specialties.
B. Shop drawings detailing fabrication and installation of oil storage tanks and accessories.
Detail equipment assemblies and indicating dimensions, weights, loadings, required
clearances, method of field assembly, components and location and size of each field
connection.
C. Wiring diagrams detailing wiring for power and control systems; differentiating between
manufacturer-installed wiring and field-installed wiring.
23 1113 - 1 FACILITY FUEL-OIL PIPING