substitution request - Alliance Construction Solutions

1.6 PROJECT CONDITIONS
A. Field Measurements: Verify the following by field measurements before fabrication and
indicate measurements on Shop Drawings:
1. Concealed framing, blocking, and reinforcements that support metal lockers
before they are enclosed.
1.7 COORDINATION
A. Coordinate sizes and locations of framing, blocking, furring, reinforcements, and other
related units of Work specified in other Sections to ensure that metal lockers can be
supported and installed as indicated.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. In other Part 2 articles where titles below introduce lists, the following requirements
apply to product selection:
1. Available Products: Subject to compliance with requirements, products that may
be incorporated into the Work include, but are not limited to, products specified.
2. Products: Subject to compliance with requirements, provide one of the products
specified.
3. Basis-of-Design Product: The design for each metal locker specified is based on
the product named. Subject to compliance with requirements, provide either the
named product or a comparable product by one of the other manufacturers
specified.
2.2 MATERIALS
A. Cold-Rolled Steel Sheet: ASTM A 1008, Commercial Steel (CS) Type B, suitable for
exposed applications.
B. Fasteners: Zinc- or nickel-plated steel, slotless-type exposed bolt heads, and selflocking
nuts or lock washers for nuts on moving parts.
C. Anchors: Select material, type, size, and finish required for secure anchorage to each
substrate.
2.3 KNOCKED-DOWN, STANDARD METAL LOCKERS
A. Available Manufacturers:
1. Lyon Workspace Products.
2. Penco Products, Inc., Subsidiary of Vesper Corporation.
3. Republic Storage Systems Company.
Project No.: 10145 METAL LOCKERS
550 15th Street Dual Brand Hotel 105113 - 2
19 March 2012