substitution request - Alliance Construction Solutions

PART 1 – GENERAL
1.01 RELATED DOCUMENTS:
Project No.: 10145
550 15 th Street Dual Brand Hotel
03/16/2012
SECTION 23 0010
BASIC MECHANICAL REQUIREMENTS
A. Drawings and general provisions of the Contract, including the General and
Supplementary Conditions, and Division 01 Conditions and specification sections, apply to
this section.
B. Related Sections: Refer to all sections in Division 21, 22, 23, and 26 specifications and
drawings.
1.02 DESCRIPTION OF WORK:
A. The work included under this Division, consists of furnishing all materials, supplies,
equipment, tools, transportation, and facilities, and performing all labor and services
required in connection with, or properly incidental to, mechanical work as described in
Division 23 Sections of the Specifications, as shown on the Contract Drawings, or
reasonably implied there-from.
B. While all work is in progress, except for short designated intervals during which
connections are to be made, continuity of service to all existing systems shall be
maintained. Contractor shall be directly responsible for any interruptions to service and
shall be required to repair any damages to existing systems which are caused by his
operations.
C. Any work which will affect the Building Occupants, including, but not limited to, work
which generates excessive noise, dust, smoke, or inconvenience to Building Occupants,
shall be performed after business hours, unless prior approval has been obtained from the
Building Manager.
D. The Contractor shall coordinate and cooperate with Owner at all times for all new-toexisting
connections, system shutdowns, restart-up, and flushing and filling of both new
and existing affected systems.
E. Provide temporary piping services where required to maintain existing areas operable, as
shown on the drawings.
1.03 WORK NOT INCLUDED:
A. Painting of exposed piping and unfinished portions of fixtures and equipment, except as
otherwise specified within this Division.
B. Concrete work including miscellaneous metal in connection with foundations, pits, sumps,
and/or concrete housekeeping pads under heat exchangers, pumps, and other
mechanical equipment; however, furnish template for spacing and sizes of concrete pads
and anchor bolts under the Mechanical Sections of these Specifications.
23 0010 - 1 BASIC MECHANICAL REQUIREMENTS