25.12.2012 Views

substitution request - Alliance Construction Solutions

substitution request - Alliance Construction Solutions

substitution request - Alliance Construction Solutions

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

PART 2 - PRODUCTS<br />

2.01 EPDM ROOFING<br />

A. EPDM: ASTM D 4637, Type I, nonreinforced, uniform, flexible EPDM sheet.<br />

1. Thickness: 60 mils, nominal.<br />

2. Exposed Face Color: White on black.<br />

2.02 AUXILIARY ROOFING MATERIALS<br />

A. General: Auxiliary materials recommended by roofing system manufacturer for intended<br />

use and compatible with roofing.<br />

B. Sheet Flashing: 60-mil- thick EPDM, partially cured or cured, according to application.<br />

C. Protection Sheet: Epichlorohydrin or neoprene nonreinforced flexible sheet, 55- to 60-mil-<br />

thick, recommended by EPDM manufacturer for resistance to hydrocarbons, non-aromatic<br />

solvents, grease, and oil.<br />

D. Bonding Adhesive: Manufacturer's standard, water based.<br />

E. Seaming Material: Single-component, butyl splicing adhesive and splice cleaner or<br />

manufacturer's standard, synthetic-rubber polymer primer and 3-inch- wide minimum,<br />

butyl splice tape with release film.<br />

F. Fasteners: Factory-coated steel fasteners and metal or plastic plates complying with<br />

corrosion-resistance provisions in FM Global 4470, designed for fastening membrane to<br />

substrate, and acceptable to roofing system manufacturer.<br />

G. Miscellaneous Accessories: Provide lap sealant, water cutoff mastic, metal termination<br />

bars, metal battens, pourable sealers, preformed cone and vent sheet flashings, molded<br />

pipe boot flashings, preformed inside and outside corner sheet flashings, reinforced EPDM<br />

securement strips, T-joint covers, in-seam sealants, termination reglets, cover strips, and<br />

other accessories.<br />

2.03 SUBSTRATE BOARDS<br />

A. Substrate Board: ASTM C 1177/C 1177M, glass-mat, water-resistant gypsum substrate,<br />

thickness as required.<br />

1. Products: Subject to compliance with requirements, available products that may be<br />

incorporated into the Work include, but are not limited to, the following:<br />

a. Georgia-Pacific Corporation; Dens Deck.<br />

b. National Gypsum Company; Gold Bond eXP Extended Exposure Sheathing.<br />

c. Temple-Inland, Inc; GreenGlass Exterior Sheathing.<br />

d. USG Corporation; Securock Glass Mat Roof Board.<br />

Project No.: 10145 EPDM ROOFING<br />

550 15th Street Dual Brand Hotel 075323 - 2<br />

10 May 2012

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!