Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commandsclassiccli (CX series only)Is enabled or disabled by switches.DescriptionSyntaxPrerequisitesOptionsThe classiccli command is enabled or disabled with the navisecclicommand.classiccli is used with naviseccli (described on page 37) as follows:classiccli [-disable] [-enable ] [-status] [-o]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.-disableDisables the Classic CLI commands.-enableEnables the Classic CLI commands.-oExecutes the command without prompting for confirmation.-statusDisplays whether the Classic CLI commands are currentlyenabled or disabled.Example naviseccli -h ipaddress -useruser -passwordpassword -scope[01]classiccli -disable [-0]This command disables the Classic CLI commands.naviseccli -h ipaddress -useruser -passwordpassword -scope[01]classiccli -enable [-0]This command enables the Classic CLI commands.naviseccli -h ipaddress -useruser -passwordpassword -scope[01]classiccli -status [-0]This command displays whether the Classic CLI commands arecurrently enabled or disabled.101