Navisphere Command Line Interface (CLI) Reference - VMware Communities

Invisible Body Tag9Domain and SecurityCommandsThis chapter provides a brief overview of the Navisphere domain andsecurity features, and includes a list of commands you can use tomanage storage-system domains and user access to storage systems.For a detailed account of the Navisphere domain and securityfeatures, refer to the EMC Navisphere Command Line Interface (CLI)(P/N 069001038).Major sections are:◆ About domains and user accounts ................................................ 420◆ Domain and security commands overview ................................. 422◆ domain -add (AX4-5 series running Navisphere Manager andNavisphere Express only, and CX series) ..................................... 423◆ domain -list ....................................................................................... 425◆ domain -remove (AX4-5 series running Navisphere Manager andNavisphere Express only, and CX series) ..................................... 426◆ domain -setmaster (AX4-5 series running Navisphere Managerand Navisphere Express only, and CX series) ............................. 428◆ ntp -list (not supported on AX series)........................................... 430◆ ntp -set (not supported on AX series) ........................................... 432◆ security -changeuserinfo (AX4-5 series running NavisphereManager and Navisphere Express only, and CX series)............. 437◆ security -list....................................................................................... 439◆ security -listrole................................................................................ 440◆ security -rmuser (AX4-5 series running Navisphere Manager andNavisphere Express only, and CX series) ..................................... 441419