Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandsconnection -addpath (CX series only)Adds a connection path to a specific connection setDescriptionThe naviseccli connection command with the -addpath functionadds a connection path to a specific connection set. A connection pathconsists of the IP address of the target system, front-end ports used,and a comment field.Syntax connection -addpath is used with naviseccli (described on page 37)as follows:connection -addpath -name name -target address[:port] [-sp a|b-portid portid] [comment text] [-o]PrerequisitesOptionsYou must have a user account on the storage system on which youwant to execute the command.-name nameSpecifies the name of the connection set to which you will add theconnection path.-target address:portSpecifies the IP address and listening port (default 3260) of thetarget storage system.-sp a|bSpecifies the storage processor on the initiating storage systemused for the session.-portid portidSpecifies the front-end port number on the storage processor ofthe initiating storage system to be used for the session.comment textSpecifies a comment or description of the connection path.-oExecutes the command without prompting for confirmation.OuputNone if the command succeeds; status or error information if it fails.397