Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandsconnection -addset (CX series only)Adds a connection setDescriptionSyntaxPrerequisitesOptionsThe naviseccli connection command with the -addset function addsa connection set to the connection set database.connection -addset is used with naviseccli (described on page 37) asfollows:connection -addset -name name [-digest none | Header | Data |Both] [-authpolicy none | shared | setspecific -userName userName-secret secret [-hexsecret]] [-o]You must have a user account on the storage system on which youwant to execute the command.-name nameSpecifies a unique identifier for the connection set. An arbitraryname supplied by the administrator, which indicates the specificconnection set using the CLI or UI.-digest none | Header | Data | BothIndicates the type of digest, a data protection mechanism, whichis turned on for connections established through this connectionset.Header indicates that the iSCSI packet headers have a checksumapplied and verified.Data indicates that the data portion of the iSCSI packet have achecksum applied and verified.Both indicates that both the headers and the data portion of theiSCSI packet have a checksum applied and verified.-authpolicy none | shared | setspecificDefines the type of authentication this connection set uses.none specifies that no credentials are needed to connect to thetarget system.shared specifies that the storage system-shared authenticationcredentials are used to authenticate.391