Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commandssetsniffer (CX series only)Starts a background verify process or changes verify processparametersDescriptionPrerequisitesSyntaxThe naviseccli or navicli setsniffer command starts a backgroundverify process or changes the parameters for the verify process. Youcan indicate a specific LUN, all LUNs in a RAID group, or all LUNs ina storage system.For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must have a user entry in the Navisphere agentconfiguration file.setsniffer is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:setsniffer -all|lun|-rg raidgroupnumber [-bv] [-bvtime priority] [-cr]where:-allIndicates to apply sniffer parameters to all luns in the storagesystem. The target SP must own one LUN at minimum.lunIndicates to apply sniffer parameters to the specified LUN. lunspecifies the logical unit number. You must target the SP thatowns the specified LUN.-rg raidgroupnumberIndicates to apply sniffer parameters to all luns in the specifiedRAID group.The optional switches are:-bvStarts a full unit background verify.-bvtime prioritySpecifies the background verify priority. priority specifies thepriority value (the rate at which the full background verify isexecuted). Valid values are ASAP, High, Medium, and Low.265