Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) CommandsportLists SP port information, removes an HBA entry from an SP’sinitiator list, and provides diagnostic capabilitiesDescriptionSyntaxPrerequisitesOptionsThe naviseccli or navicli port command lists SP port information,removes an HBA entry from an SP’s permitted initiator list (initiatorrecord), and provides diagnostic capabilities for SAN Copy initiatorrecords and duplicate host initiator records. See also thestoragegroup -setpath command starting on page 318 and alpacommand, page 56.To register an HBA with a storage system (opposite of removing anHBA entry), use the register command.port is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:port [-diagnose [optional-diagnose-switches]] [-list[optional-list-switches]] [-removeHBA [optional-removeHBA -switches][-o]-list [ [-all] [-arraycommpath] [-arrayhba] [-bread] [-failovermode][-gname] [-hba] [-initiatorcount] [-mac] [-reads] [-sfpstate] [-sp][-uid StorageGroupUID] [-unitserialnumber] [-writes] [ -physical][-usage] ]-removeHBA [-hbauid hbauid | –host hostname |-hostip IPAdress|-all]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must have a user entry in the Navisphere agentconfiguration file.The optional port -diagnose switches are:[-sancopy [-clean]] [-host]-sancopy [-clean]Lists the SAN Copy initiator records where the initiator is thesame as that of the targeted SP. If you include the optional -cleanswitch, the CLI prompts you to remove the initiator records thatare displayed.292 EMC Navisphere Command Line Interface (CLI) Reference