Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) CommandsExample 5The following example shows sample output of the port -list -maccommand targeted to a Fibre Channel storage system:naviseccli -h 10.14.5.202 port -list -sp -macNote: To use this command with navicli, replace naviseccli with navicli.Information about each SPPORT:SP Name: SP ASP Port ID: 1SP UID: 50:06:01:60:90:21:26:3D:50:06:01:61:10:21:26:3DLink Status: UpPort Status: OnlineSwitch Present: NOMAC Address: Not ApplicableSP Name: SP ASP Port ID: 0SP UID: 50:06:01:60:90:21:26:3D:50:06:01:60:10:21:26:3DLink Status: UpPort Status: OnlineSwitch Present: YESSwitch UID:10:00:08:00:88:60:8E:77:20:0D:08:00:88:60:8E:77SP Source ID: 7998739MAC Address: Not ApplicableSP Name: SP BSP Port ID: 1SP UID: 50:06:01:60:90:21:26:3D:50:06:01:69:10:21:26:3DLink Status: UpPort Status: OnlineSwitch Present: NOMAC Address: Not ApplicableSP Name: SP BSP Port ID: 0SP UID: 50:06:01:60:90:21:26:3D:50:06:01:68:10:21:26:3DLink Status: UpPort Status: OnlineSwitch Present: YESSwitch UID:10:00:08:00:88:60:8E:77:20:0C:08:00:88:60:8E:77SP Source ID: 7998483MAC Address: Not Applicable303