Navisphere Command Line Interface (CLI) Reference - VMware Communities

Domain and Security CommandsOptionsIPAddrThe IP address of the storage system you want to set as master.Note: You must identify the storage system by the storage system’s IPaddress. Specify the IP address in the form b.c.d.e where b, c, d and erange from 0 through 255. Example 111.222.33.44.-oExecutes the command without prompting for confirmation.OutputExampleNone if the command succeeds; status or error information if it fails.The following example sets the specified storage system, as themaster storage system in a domain.naviseccli -address ss1_spa domain -setmaster 111.222.33.44WARNING: You are about to set the following node as themaster of the domain: 111.222.33.44Proceed? (y/n) y429