Navisphere Command Line Interface (CLI) Reference - VMware Communities

CLI Error CodesError valueDescription273 Session is rolling back, can not stop.274 Session is rolling back can not activate.275 Session is rolling back can not deactivate.276 Mirrors with same name.277 Error: -phonehome response test is not supported on the targeted agent.Please use -ipconnecthome or -mdmconnecthome instead.278 Response using modem from agent on SP is not supported.279 Error: -ipconnecthome response test failed.280 Error: -ipconnecthome is not supported.281 Error: -mdmconnecthome response test failed.282 Error: -mdmconnecthome is not supported.283 Error: -connecto and -routerip are mandatory.284 Error: -modemnum, -connectto, and -method are mandatory.285 Error: -smtpmailserver, -destaddress, and -serialnumber aremandatory.286 Error: -emailhome response test failed.287 Error: invalid modem method. Valid method should be one of \"DirectDial\", \"UUNET WAN\", \"UUNET SYM\", \"UUNET EQN\", \"UUNETJTO\", \"UUNET EQT\", \"UUNET GEN\",\"UUNET GRC\" and casesensitive.288 Cannot add a hot spare to a storage group.289 Chglun parameter not supported on a non-FLARE LUN.290 Unable to bind the metaLUN, use CLE command metalun -destroyinstead.291 This version of FLARE software does not support getsniffer or setsnifferon metaLUNs.292 You must issue this command from the SP that owns the LUN on whichthe verfiy will be run.293 Cannot specify both -feature and -featurename.326 Invalid switch specified for a reserved snap session.478 EMC Navisphere Command Line Interface (CLI) Reference