Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-idleReturns the percentage of time the SP is idle.-readReturns the number of reads received by the SP.-rwReturns the following:Host read requests: The number of read requests made by thehost to the LUN.Host write requests: The number of write requests made by thehost to the LUN.Host blocks read: The number of blocks the host read from theLUN.Host blocks written: The number of blocks written from the hostto the LUN.-scReturns the status of the system cache (on/off).-sfReturns the status of the system fault LED (on/off).-slReturns the status of statistics logging (on/off).-timeReturns the SP’s system time.-writeReturns the number of writes received by the SP.-allIn addition to the getcontrol command information, it displaysthe serial number for SP.OutputThe following is a sample output. Actual output varies dependingupon which switches you use with the getcontrol command.System Fault LED:Statistics Logging:SP Read Cache StateSP Write Cache StateONOFFDisabledDisabled159