Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsNote: If you have the Auto-Negotiate feature turned on, the Speed valuethat is generated in the output does not have a value of auto. The valuereflects the speed at which the port is currently operating. If you have theAuto-Negotiate feature turned on and you specify the -requestedspeedswitch, the Requested Value displays a value of auto.-capablespeeds (CX4 series only)Returns a list of valid speed values for each port.-requestedspeed (CX4 series only)Displays requested speed value.-linkstaus (CX4 series only)Displays link status of management port.-all (CX4 series only)Displays all information for network admin command.Note: The command switches -speed, -auto, -capablespeeds,-requestedspeed, -linkstatus, and -all are supported only on Secure CLI.Classic CLI does not support these command switches.OutputSee the previous page. If the version of FLARE software running onthe SP does not support this command, a Not supported errormessage is printed to stderr.If the command switches -speed, -auto, -capablespeeds,-requestedspeed, -linkstatus, and -all are not supported on thestorage system then an Invalid command line parameters errormessage is printed to stderr.If IPv6 does not support the storage system an error is displayed:IPv6 is not supported for this platform.IPv6 is enabled but a value for one of the IPv6 values has not been set,the value will be displayed as an empty string.237