Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commandsgetsniffer (CX series only)Gets background verify reportsDescriptionSyntaxPrerequisitesOptionsThe naviseccli or navicli getsniffer command retrieves backgroundverify reports. You can retrieve reports for a specific LUN, all LUNsin a RAID group, or all LUNs in a storage system.getsniffer is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:getsniffer -all|lun|-rg raidgroupnumber [-alltot] [-curr] [-nonv] [-rg][-rec]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must be able to log in to the host runningNavisphere CLI.-allRetrieves reports on all LUNs in the storage system, owned by thetarget SP.Note: When you specify the -all switch, it may generate a sizeableamount of data and take a considerable amount of time to generate thedata.lunSpecifies the logical unit on which to report. lun specifies thelogical unit number.-rg raidgroupnumberRetrieves reports on all LUNs in the RAID group, owned by thetarget SP.The optional switches are:-alltotRetrieves and displays the report of historical totals of all full unitverifies.199