Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-reservedDisplays the reserved LUN pool information.-rgDisplays only information about RAID groups. This is the sameinformation displayed by getrg command.-sgDisplays only information about storage groups. This is the sameinformation displayed by the storagegroup command.-snapviewsDisplays only information about snapview. This is the sameinformation displayed by the snapview command.-sancopyDisplays only information about sancopy. This is the sameinformation displayed by the sancopy command.Output formatsAgent/Host information (same as returned by command getsp)Server IP Address: 10.15.22.176 Server/SP IP addressAgent Rev: 5.3.0 (5.0) Revision of the agent.Agent/Host Information-----------------------Desc: MY_K10 ASCII description of device.Node: A-F20011000207 Device name or location in file system ofdevice. Use this value when specifying thecommand line device name.Physical Node: K10Signature: 196618 Unique signature of SPPeer Signature: 176166Unique signature of peer SPSCSI Id: 0 SCSI id of SP host connectionSP Identifier: A SP Identifier (A or B)Model: 4700-2 Model number of SPModel Type: Rackmount Model Type (deskside, rackmount)Prom Rev: 5.94.00 Prom revision.SP Memory: 817 SP memory in megabytes.Serial No: F20011000207 Serial number of device.Cabinet: DPE cabinet type (DPE)Installed packages:125