Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsgetsptimeDescriptionSyntaxPrerequisitesOptionsOutputGets the date and time setting on each SP system clockThe naviseccli or navicli getsptime command displays the systemtime set on an SP. Times are the same on SPs, since the FLAREsoftware ensures that both SP clocks show the same time.getsptime is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:getsptime [-spa|-spb]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must be able to log in to the host runningNavisphere CLI.-spa or -spbSpecifies from which SP to display the date and time.The SP date and time.Example naviseccli -h data1_spa getsptime -spaNote: To use this command with navicli, replace naviseccli with navicli.204 EMC Navisphere Command Line Interface (CLI) Reference