Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commandsioportconfig -list (CX4 series only)Displays information about all I/O modules and corresponding I/Oports.DescriptionThe naviseccli ioportconfig -list command displays the informationabout all I/O modules and I/O ports on the CX4 series storagesystem.Note: Classic CLI does not support this command.SyntaxPrerequisitesOptionsioportconfig -list is used with naviseccli (described on page 37) asfollows:ioportconfig -list -iomodule slot_num [-sp a|b] [-pportid] [-portrole][-portusage] [-porttype] [-portstate] [-portsubstate][-isportpersisted] [-lportid] [-all]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.-listDisplays information about all I/O modules and I/O ports (forboth SPs).-iomodule slot_numDisplays information about the module and all I/O ports thatexist on the given module. If the slot_num is not provided, thesystem returns an error.-sp a|bIf the -sp switch is not specified, then information about the I/Omodule with the given slot_num for both SPs will be shown.-pportidDisplays the physical port number.-portroleDisplays whether the port is operating as a front-end or back-endport. If not persisted, this field displays an error Uninitialized.207