Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandsconnection -modifypath (CX series only)Modifies the parameters of a connection pathDescriptionThe naviseccli connection command with the -modifypath functionmodifies the parameters of a connection path.Note: You must have an IP address and optional port number to completethis command.SyntaxPrerequisitesOptionsconnection -modifypath is used with naviseccli (described onpage 37) as follows:connection -modifypath -name name -target address[:port] -add-sp a|b -portid portid [-comment text] [-o] |-add -comment text [-o]|-del -sp a|b -portid portid [-o]You must have a user account on the storage system on which youwant to execute the command.-name nameSpecifies the name of the connection set, which includes the pathyou want to modify.-target address:portSpecifies the IP address and listening port (default 3260) of thetarget storage system.-sp a|bSpecifies the storage processor on the initiating storage systemused for the session.-portid portidSpecifies the front-end port number on the storage processor ofthe initiating storage system to be used for the session.-comment textSpecifies a new comment added to the connection path.400 EMC Navisphere Command Line Interface (CLI) Reference