Navisphere Command Line Interface (CLI) Reference - VMware Communities

LUN Migration Commandsmigrate -cancelDescriptionCancels a LUN migration sessionThe naviseccli migrate command with the -cancel switch cancels anin-process LUN migration. The destination LUN is deleted whencanceling occurs. Canceling the migration does not cause any dataloss. The original LUN remains unchanged.For AX4-5 series storage systems, the migrate command with the-cancel switch is supported only for halted or faulted migrations.Note: You can cancel only one migration at a time.SyntaxPrerequisitesOptionsOutputmigrate -cancel is used with naviseccli (described on page 37) asfollows:migrate -cancel -source LUN ID|WWN [-o]You must have a user account on the storage system on which youwant to execute the command.-source LUN ID|WWNSpecifies the source LUN for migration as the LUN ID or WorldWide Name (WWN).-oOverrides; does not prompt for confirmation.None if the command succeeds; status or error information if it fails.Example naviseccli migrate -cancel -source 6This command cancels a LUN migration session whose source LUN’sID is 6.415