Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandsisns -deleteserverDescriptionDeletes an iSNS server from a storage system’s iSNS serviceconfigurationThe naviseccli isns command with the -deleteserver function, deletesan iSNS server from a storage system’s iSNS service configuration.Note: If the IP address of the server you specify to delete is not configured,you will receive an error message.If you delete a primary server, the next server listed in the storagesystem’s iSNS service configuration becomes the primary.Note: The primary server is the server the iSNS service activelycommunicates with.SyntaxPrerequisitesOptionsisns -deleteserver is used with naviseccli (described on page 37) asfollows:isns -deleteserver IPAddr [-o]You must have a user account on the storage system on which youwant to execute the command.IPAddrThe IP address of the iSNS server you want to delete.Note: You must identify the iSNS server by the server’s IP address.Specify the IP address in the form b.c.d.e where b, c, d and e range from 0through 255. Example 111.222.33.44.-oExecutes the command without prompting for confirmation.OutputExampleNone if the command succeeds; status or error information if it fails.The following example deletes the specified iSNS server from thestorage system’s iSNS configuration.406 EMC Navisphere Command Line Interface (CLI) Reference