Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-o16 - Fujitsu1C - HP typeExecutes the command without prompting for confirmation.Examples naviseccli -h ss1_spa systemtypeThe configured system type is: 0x3The current system type is: 0x3naviseccli -h ss1_spa systemtype -config 2In order for this command to execute, write cachemust be disabled and memory size set to zero:naviseccli -h ss1_spa setcache -wc 0.This operation will cause a storage system reboot!DO YOU WISH TO CONTINUE? (y/n) yThis example sets the storage-system type to an HP-UX system typewith auto-trespass on. The newly configured system type willbecome the current system type after the SP restarts.Note: To use this command with navicli, replace naviseccli with navicli.284 EMC Navisphere Command Line Interface (CLI) Reference