Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commandsspcollect -set (automated version)Sets the automated SPCollect service on or offDescriptionThe naviseccli spcollect command with the -set function lets you setthe automated SPCollect process on or off.The automated SPCollect service is part of the Peerwatch serviceincluded with FLARE Operating Environment version02.19.xxx.5.yyy or higher.Note: Use spcollect -info to verify whether the service is enabled or disabled.Syntaxspcollect -set is used with naviseccli (described on page 37) asfollows:spcollect -set -auto on|off [-o]PrerequisitesOptionsOutputExampleYou must have a user account on the storage system on which youwant to execute the command.-auto on|offSpecifies to set the automated SPCollect process on or off. If youindicate on, it turns the automation service on; off indicates to turnthe automation service off.-oExecutes the command without prompting for confirmation.None if the command succeeds; status or error information if it fails.naviseccli -address ss1_spa spcollect -set -auto onThis command turns the automated SPCollect process on.276 EMC Navisphere Command Line Interface (CLI) Reference