Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) Commandsstoragegroup command, -disconnecthost switch-disconnecthost -host HostName [-o]Disconnects all of the specified host’s HBA/SP combinationsfrom the currently connected storage group, and reconnects themto ~management. You must specify the host using the -hostswitch. If the -o switch is present, the command will be executedwithout asking for user confirmation.-host HostNameHostName specifies the user-defined hostname.storagegroup command, -enable switch [-o]Enables data access control. Sets the default storage group to~management. If the -o switch is present, the command willbe executed without asking for user confirmation.storagegroup command, -list switch-list [-gname StorageGroupName| -uid StorageGroupUID ] -hostDisplays information about the specified storage group. When nostorage group is specified, -list displays information about eachuser-defined storage group in the system. You can use one of thefollowing optional switches with -list.-gname StorageGroupNameStorageGroupName specifies a user-defined storage groupname.-hostDisplays the hostname of the attached host.-uid StorageGroupUIDSpecifies the storage group unique ID.storagegroup command, -removehlu switch-removehlu -gname StorageGroupName| -uid StorageGroupUID-hlu hlunnumberRemoves the specified host LUN number from the specifiedstorage group. You must use one of the following switches:-gname StorageGroupNameStorageGroupName specifies a user-defined storage groupname.313