Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) CommandsYou must specify the host using the -host switch, and the storagegroup using the -gname switch or the -uid switch. If you includethe -o switch, the command will be executed without asking foruser confirmation. Also see the example on page 322.-host HostNameSpecifies the user-defined hostname.-gname StorageGroupNameStorageGroupName specifies the storage group name.-uid StorageGroupUIDStorageGroupUID specifies the unique ID.storagegroup command, -create switch-create -gname StorageGroupNameCreates a storage group. You must use the -gname switch with-create. Also see the example on page 322.-gname StorageGroupNameStorageGroupName specifies a user-defined storage groupname.storagegroup command, -destroy switch-destroy -gname StorageGroupName| -uid StorageGroupUID [-o]Destroys the specified storage group. If you include the -o switch,the command will be executed without asking for userconfirmation. You must use one of the following switches with-destroy:-gname StorageGroupNameStorageGroupName specifies a user-defined storage groupname.-uid StorageGroupUIDSpecifies the storage group unique identification number.312 EMC Navisphere Command Line Interface (CLI) Reference