Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandsconnection -getportRetrieve a specific iSCSI port or the list of all the iSCSI portsDescriptionSyntaxPrerequisitesOptionsThe naviseccli connection command with the -getport functiondisplays information about either a specified iSCSI port or a list of alliSCSI ports. If no arguments are specified, all of the iSCSI portsdefined on the targeted storage system are displayed.connection -getport is used with naviseccli (described on page 37) asfollows:connection -getport [-sp a|b] [-portid portid] [-address IPAddress][-subnetmask] [-gateway] [-initiatorAuthentication] [-mtu]-If a change in settings has been requested, a confirmation will bedisplayed.The -sp and -portid parameters select which iSCSI ports will bedisplayed. If both options are specified, a particular iSCSI port isspecified. If either or both of the options is omitted, all iSCSI portsthat meet the search criteria are displayed.You must have a user account on the storage system on which youwant to execute the command.--sp a|bSpecifies SP A or B. Information will be displayed only for iSCSIports configured on the specified SP.-portid portidSpecifies a iSCSI port ID. Displays information for only thespecified iSCSI port.The following parameters, -address, -subnetmask, -gateway, and-initiatorAuthentication define additional information that isdisplayed for iSCSI ports. If none of these options is specified, allfields are displayed. The SP and Port ID fields are always displayed.-addressDisplays the IP address of the specified iSCSI ports. The addressis a 32-bit numeric address written as four 8-bit numbers (0-255)separated by periods (called the dotted-quad format). For example,165.152.36.35.378 EMC Navisphere Command Line Interface (CLI) Reference