Navisphere Command Line Interface (CLI) Reference - VMware Communities

LUN Expansion (MetaLUN) Commands-components*Displays the contents of all components in all metaLUN on thestorage system.Issuing the -components command with a metaLUN name,number or WWN displays the contents of all components for thatspecific metaLUN.-currentownerLists the current SP owner of all metaLUNs in the storage system.If neither SP owns the metaLUN a value of Unknown is returned.Issuing the -components command with a metaLUN name,number or WWN lists the current SP owner of the specifiedmetaLUN.--canexpandDisplays the ability of all metaLUNs on the storage system to beexpanded - Yes or No.Issuing the -canexpand command with a metaLUN name,number or WWN displays the ability of the specified metaLUN tobe expanded - Yes or No.-defaultownerLists the default SP owner of all metaLUNs on the storage system.Issuing the -defaultowner command with a metaLUN name,number or WWN lists the default SP owner of the specifiedmetaLUN.-drivetypeDisplays the drive type for all metaLUNs on the storage system.Issuing the -drivetype command with a metaLUN name, numberor WWN displays the drive type for the specified metaLUN.-expansionrateDisplays the expansion rate for all metaLUNs on the storagesystem (see page 335). Valid values are 0 (Low), 1 (Medium), 2(High), 3 (ASAP), or N/A if the metaLUN is not currentlyexpanding.Issuing the -expansionrate command with a metaLUN name,number or WWN displays the expansion rate for the specifiedmetaLUN (see page 335).343