Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-cablingspsbReturns the cabling status for SPS B (standby power supply B).-cachecard (AX series only)Returns the hardware state information of the cache memorycard.The following table lists the possible hardware states. See also theluncache command.Hardware stateOKNot presentFaultedBattery chargingIn wrong arrayMeaningThe power on the main SP is on and the cache memory card batteryis fully charged. The cache memory card is in normal operation.The cache memory card is not present.The cache memory card has hardware faults.The power on the main SP is on and the battery is charging on thecache memory card.The cache memory card is from the wrong storage system.-cpuaReturns the state of the CPU module on SP A.-cpubReturns the state of the CPU module on SP B.-dimmaReturns the state of the DIMM module on SP A.-dimmbReturns the state of the DIMM module on SP B.-encdrivetypeDisplays the type(s) of drives that are currently allowed to run inthe enclosure.-fanaReturns the state information for fan A.-fanbReturns the state information for fan B.162 EMC Navisphere Command Line Interface (CLI) Reference