Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsNote: Duplication will not create the following logical components on thetarget storage system(s): Snapview sessions, SAN Copy information,synchronous/asynchronous mirror secondary information. If the XMLcaptured from a mirror secondary storage system is used for duplication,then no mirror information will be created in the target storage system.Note: While the -capture command supports both XML and CSV file formats,the -duplicate command processes information only in the XML format.!CAUTIONThis command creates a new configuration in the storage system;use it only after completely understanding the command’sbehavior.Syntax arrayconfig -duplicate is used with naviseccli (described on page 37)as follows:arrayconfig -duplicate [-input path to local file name] [-recover] [-stop][-rollback] [-status] [-logfile] [-o]PrerequisitesOptionsManager (or above) privileges are required to execute the arrayconfig-duplicate command.arrayconfig -duplicate [-input path to local file name] [-recover] [-stop][-rollback] [-status] [-logfile] [-o]Optional switches are:-input path to local file nameThis is the filename of the captured information (captured fromissuing the configuration -capture command).-logfileRetrieves and outputs the duplication logfile stored on thetargeted storage system.-oExecutes the command without prompting for confirmation.63