Navisphere Command Line Interface (CLI) Reference - VMware Communities

LUN Migration Commandsmigrate -modifyDescriptionSyntaxPrerequisitesOptionsModifies a LUN migration sessionThe naviseccli migrate command with the -modify switch modifies aLUN migration session according to the parameters you specify.migrate -modify is used with naviseccli (described on page 37) asfollows:migrate -modify -source LUN ID|WWN[-rate low|medium|high|asap|value] [-o]You must have a user account on the storage system on which youwant to execute the command.-source LUN ID|WWNSpecifies the source LUN of the migration you want to modify.You can specify the LUN ID or World Wide Name (WWN).-rate low|medium|high|asap|valueSpecifies the LUN migration rate. Valid rates are low or 0,medium or 1, high or 2, and asap or 3.Note: Do not use the asap migration rate when the storage system is inproduction, as the normal host I/O may be interrupted.Use asap only when the storage system is offline (free of any host-level I/O).-oOverrides; does not prompt for confirmation.OutputExampleNone if the command succeeds; status or error information if it fails.naviseccli migrate -modify -source 6 -rate mediumThis command modifies LUN migration rate to medium.416 EMC Navisphere Command Line Interface (CLI) Reference