Navisphere Command Line Interface (CLI) Reference - VMware Communities

iSCSI (Internet SCSI) Commandssetspecific indicates that the username and secret stored as partof this connection set are used for authentication.-userName userNameSpecifies the CHAP username used by the initiator whenchallenged by the target storage system. For CHAP, a usernameand secret must be defined.-secret secretSpecifies the CHAP secret to be used with the username whenchallenged by the target storage system. You can specify thesecret in ASCII or hexadecimal characters (see the -hexsecretswitch that follows). By default, -secret is an ASCII string. ASCIIsecrets must consist of at least 12 and no more than 16 characters.Hexadecimal secrets must consist of at least 12 and no more than16 pairs of data (24 to 32 characters).-hexsecretIf initiator user account data is being added, including the-hexsecret parameter specifies that -secret is a hexadecimal value.-oExecutes the command without prompting for confirmation.OuputExampleNone if the command succeeds; status or error information if it fails.The following example adds a connection set to the connection setdatabase:connection -addset -name MirrorSet -authpolicy none -digest none-o392 EMC Navisphere Command Line Interface (CLI) Reference