Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commandsshutdown (AX4-5 series and AX series only)Shuts down and powers off the storage systemDescriptionSyntaxPrerequisitesThe naviseccli or navicli shutdown command shuts down andpowers off the storage system you specify.shutdown is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:shutdown [-o]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must have a user entry in the Navisphere agentconfiguration file.Options -oExecutes the command without prompting for confirmation.OutputExampleNone if the command succeeds; status or error information if it fails.naviseccli -h ss1_spa shutdownThis command shuts down and powers off the specified storagesystem.Note: To use this command with navicli, replace naviseccli with navicli.Before you shutdown the storage system, stop all I/O fromany servers connected to the storage system and save allunsaved data to disk. During the shutdown process youwill lose access to all data on the LUNs but you will notlose any data. When you power up the storage system youwill regain access to the LUNs.Do you want to shutdown and power off the subsystem now(y/n)?272 EMC Navisphere Command Line Interface (CLI) Reference