Navisphere Command Line Interface (CLI) Reference - VMware Communities

About CLI CommandsnaviseccliDescriptionSyntaxSends status or configuration requests to a storage system from thecommand lineThe naviseccli command sends storage-system management andconfiguration requests to a storage system from the Internet.The naviseccli command is used as follows:naviseccli -helpornaviseccli[-address IPAddress|NetworkName|-h IPAddress|NetworkName][-AddUserSecurity][-f filename][-m][-nopoll|-np][-parse|-p][-password password][-port port][-q][-RemoveUserSecurity][-scope 0|1|2][-timeout |-t timeout][-user username][-v][-xml]CMD [optional_command_switches]PrerequisitesOptionsAnyone who can log in to a host running Navisphere CLI 6.X or latercan use this command.The naviseccli switches are:-helpDisplays the help screen and does not start the naviseccli process.To start the naviseccli process, use one or more of the switchesthat follow instead.37