Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) CommandsOutputThe first time you run the sc_off command, you will see an outputsimilar to the following:You have asked to remove all shared storage componentsfrom the indicated storage system.The following functions will be performed, if necessary:Clear the storage system's passwordTurn fairness offSet the default storage group to ~physicalRemove all initiator recordsRemove all user defined storage groupsDo you wish to proceed? (y/n)? yClearing the storage system's passwordOld Password: ***Turning fairness offSetting the default storage group to ~physicalRemoving all initiator recordsRemoving all user defined storage groupsIf you run the command a second time, and the first timethrough completed successfully, the output will be asfollows:You have asked to remove all shared storage componentsfrom the indicated storage system.The following functions will be performed, if necessary:Clear the storage system's passwordTurn fairness offSet the default storage group to ~physicalRemove all initiator recordsRemove all user defined storage groupsDo you wish to proceed? (y/n)? yExample naviseccli -h ss1_spa sc_offNote: To use this command with navicli, replace naviseccli with navicli.307