Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsgetconfigDescriptionSyntaxPrerequisitesOptionsReturns storage-system type configuration informationDisplays storage-system type configuration information. If you omitswitches, it displays all configuration type information. You can setconfiguration information with setconfig.Use the getsp command to display SP revision and signatureinformation.getconfig is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:getconfig [-ptype] [-que] [-rer] [-tn] [-pg8] [-rep]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must be able to log in to the host runningNavisphere CLI.-ptypeDisplays the storage-system package type.-queDisplays the setting on how queue full status is handled. Yesmeans that the FLARE software will return device status to theoperating system as busy, instead of queue full, when the devicequeue is full.-rerDisplays the number of recovered errors.-tnDisplays the state of the Target Negotiate bit.-pg8Displays SCSI mode page 8 information.-repDisplays periodic error report information: the number ofreported errors or N/A.156 EMC Navisphere Command Line Interface (CLI) Reference