Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) CommandsArrayCommPath: 1Failover mode: 1Unit serial number: ArrayExample 3The following example shows sample output of the port -list -hbacommand targeted to an iSCSI HBA:naviseccli -h IPAddress_SP port -list -hbaNote: To use this command with navicli, replace naviseccli with navicli.Information about each HBA:HBA UID: iqn.1991-05.com.microsoft:nlpc20234Server Name: nlpc20234Server IP Address: 25.24.23.235HBA Model Description:HBA Vendor Description:HBA Device Driver Name:Information about each port of this HBA:SP Name:SP ASP Port ID: 0HBA Devicename: \\.\SCSI2:0:0:1Trusted:NOLogged In:YESSource ID: 4294967295Defined:YESInitiator Type: 3StorageGroup Name: StorageGrpnlpc20234Information about each SPPORT:SP Name:SP ASP Port ID: 0SP UID:iqn.1992-04.com.emc:cx.apm00034901526.a0Link Status: UpPort Status: OnlineSwitch Present: Not ApplicableSP Name: SP ASP Port ID: 1SP UID:iqn.1992-04.com.emc:cx.apm00034901526.a1Link Status: DownPort Status: OnlineSwitch Present: Not ApplicableSP Name: SP BSP Port ID: 0SP UID:iqn.1992-04.com.emc:cx.apm00034901526.b0Link Status: DownPort Status: OnlineSwitch Present: Not Applicable301