Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsgetspGets SP revision and serial number informationDescriptionDisplays SP identification information. If you omit switches, itdisplays all configuration type information.Note: Use the getsp command to display SP revision and signatureinformation.SyntaxPrerequisitesOptionsgetsp is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:getsp [-type] [-sig] [-psig] [-rev] [-ser] [-mem] [-id]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must be able to log in to the host runningNavisphere CLI.-typeDisplays the SP type.-sigDisplays the SP unique signature.-psigDisplays the SP peer unique signature.-revDisplays the SP revision number.-serDisplays SP serial number.-memDisplays the SP memory size.-idDisplays the SP SCSI ID if available, otherwise displays N/A.202 EMC Navisphere Command Line Interface (CLI) Reference