Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-d disksDownloads disk vendor firmware to specified disks.disks specifies the physical disks whose firmware will be updated.The order in which you specify the disks has no significance. See“LUN IDs, unique IDs, and disk IDs” on page 43 to verify theformat for specifying disks.-oExecutes the command without prompting for confirmation.-wInitiates a warm reboot after the firmware is downloaded. Awarm reboot performs the same functions as a reboot except thatthe powerup diagnostics are not executed. In systems that usecaching, the caches are re-initialized. A warm reboot executes inunder 50 seconds.OutputA warning message appears before the command is issued to thestorage system, if a reboot is necessary. Errors are printed to stderr.Example naviseccli -h ss1_spa firmware /tmp/mcode.rev -oDownloads mcode.rev, which is located in the tmp directory.Note: To use this command with navicli, replace naviseccli with navicli.115