Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsPrerequisitesOptionsFor naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must be able to log in to the host runningNavisphere CLI.-nameDisplays the SPs network name.-ipv4Displays all IPv4 information. This is the default ip address.-ipv6Displays all IPv6 information.-addressDisplays the SPs network IP address (IPv4/IPv6 address).-gatewayDisplays the IP address (IPv4/IPv6 address) of the SPs gatewaysystem.-subnetmaskDisplays the SPs IPv4 subnet mask.-globalprefixDisplays the SPs IPv6 global prefix.-modeDisplays the IPv6 status. The statuses are automatic, manual, anddisabled.-speed (CX4 series only)Displays the current port speed for a specified SP.-auto (CX4 series only)Indicates whether the Auto-Negotiate feature is turned on or off.The CLI returns a yes value if the feature is turned on, a no valueif the feature is turned off, and a not supported value if thefeature is not supported.236 EMC Navisphere Command Line Interface (CLI) Reference