Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic CommandsemconfigurationDescriptionSyntaxPrerequisitesOptionsExampleConfigures event monitorThe emconfiguration command can be used to disable eventmonitoring of an SP, for a specified amount of time. It will thenre-enable the response after the specified time is up.emconfiguration is used with naviseccli (described on page 37) ornavicli (described on page 45) as follows:emconfiguration [-reloadconfig] [-disableresponse time][-enableresponse]For naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must have a user entry in the Navisphere agentconfiguration file.-disableresonse timeThis switch disables event monitoring of the SP for the amount oftime specified. Time is indicated in minutes, with a maximum offour hours.-enableresponseThis switch re-enables the response.-reloadconfigThis switch will reload a template file.navicli -h ss1_spa emconfiguration -reloadconfig -disableresponsetime -enableresponse109