Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-lex expansion (Not supported on AX4-5 series and AX series)Available only when the -expand disks switch is used. Notavailable for storage systems that support metaLUNs.expansion specifies functionality as follows:yes = Enables LUN expansion for the specified RAID groupno = Disables LUN expansion for the specified RAID group(the default)-pri priority (Not supported on AX4-5 series and AX series)Sets the priority for defragmenting or expanding the specifiedRAID group. priority specifies the process priority as follows:high = high prioritymedium = medium prioritylow = low priority-rm yes|no (Not supported on AX4-5 series and AX series)Enables or disables the removal of the specified RAID group afterthe last LUN in it has been unbound (unbind command).remove specifies the functionality as follows:yes = Removes the RAID groupno = Does not remove the RAID group (the default)-trespass sp (Not supported on CX series, AX4-5 series, and AXseries)Trespasses all LUNs in the RAID group to the specified storageprocessor. sp specifies the SP as follows:a = SP Ab = SP BExample naviseccli -h ss1_spa chgrg 2 -trespass aThis command trespasses all LUNs in RAID group 2 to SP A.Note: To use this command with navicli, replace naviseccli with navicli.99