Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commandsclearstats (CX series only)Resets the SP’s statistics loggingDescriptionSyntaxPrerequisitesOutputThe naviseccli or navicli clearstats command resets statistics loggingon the SP. If statistics logging is on, it is turned off, and then back on.If statistics logging is off, it is turned on, and then off.The command affects only the log of the SP you specify with the -hswitch in the command.clearstats is used with naviseccli (described on page 37) or navicli(described on page 45) as follows:clearstatsFor naviseccli, you must have a user account on the storage systemon which you want to execute the command.For navicli, you must have a user entry in the Navisphere agentconfiguration file.Confirmation message.Example naviseccli -h ss1_spa clearstatsStatistics successfully cleared, statistics loggingdisabled.Note: To use this command with navicli, replace naviseccli with navicli.103