Navisphere Command Line Interface (CLI) Reference - VMware Communities

Domain and Security CommandsDomain and security commands overviewThe naviseccli commands in this chapter include the domain andsecurity commands. The following table identifies the commands.Note: The domain commands, -list, -setmaster, and -remove, running onAX4-5 series Navisphere Express are supported with FLARE version02.23.050.5.7.xx or later.Note: The respective security commands, -adduser, -changeuserinfo,-rmuser, and -list supports adding, changing, removing a globaladministrator user account information and listing all the users on an AX4-5series Navisphere Express supported with FLARE version 02.23.050.5.7.xx orlater.Table 5naviseccli domain and security commandsCommandDescriptionDomain commandsdomain -add Adds one or more storage systems to a domain .domain -listdomain -removedomain -setmasterDisplays all storage systems in a domain.Removes a storage system from a domain.Sets a storage system as the master storage system in adomain.Security commandssecurity -addusersecurity -changeuserinfosecurity -listsecurity -listrolesecurity -rmuserCreates a user account.Changes the password and/or role of a user account.Displays user accounts.Lists the user’s security role.Deletes a user account.422 EMC Navisphere Command Line Interface (CLI) Reference