Navisphere Command Line Interface (CLI) Reference - VMware Communities

Access Logix (Storage Group) CommandsNote: If you are running VMware ESX Server, rescan the bus at the ESXServer level. If you are running ESX Server 2.5.x, you must then powerdown any virtual machine to which you will assign LUNs. If you arerunning ESX Server 3.x, you do not need to power down the virtualmachine. At the ESX Server level, assign the LUNs to the virtualmachines. When you have finished, if you are running ESX Server 2.5.x,power up the VM. If you are running ESX Server 3.x, you do not need topower up the VM.6. As needed, reconfigure host-storage group connections usingmanager or the CLI command storagegroup -sethost. If you needto disconnect a host from a storage group, usestoragegroup -disconnecthost.291