Navisphere Command Line Interface (CLI) Reference - VMware Communities

Basic Commands-v verify-priority (AX4-5 series running Navisphere Manager and CXseries only)Sets the priority at which the data on each LUN is verified if an SPfails and is replaced during I/O operations. verify-priorityspecifies the priority. Valid values are ASAP, High, Medium, andLow. A lower priority verifies LUN data more slowly and has lessimpact on overall system performance. The default is High.Note: The verify priority properties are unavailable for RAID 0, disk, orhot spare LUN.-wc write-cache (Dual-SP AX4-5 series running Navisphere Manageronly)Enables or disables the storage-system write cache for thisspecific LUN. write-cache values:0 = Disables write cache1 = Enables write cache (the default).-z stripe-countSets the number of stripes in a LUN. The stripe-count specifies thenumber of stripes. Valid values are any number greater than orequal to 0. The default is 0, which binds the maximum number ofstripes available. For example, when binding a RAID 5 LUN witha stripe count of 2, partition the LUN into 2 stripes, thuspreventing access to the remainder of the available space. Thisswitch is useful for fast bind operations to produce LUNs for testpurposes.OutputThere is no output. Errors are printed to stderr.87